Before anyone can access the database, you must start the database
server. The database server program is called
lightdb.
If you are using a pre-packaged version of LightDB, it almost certainly includes provisions for running the server as a background task according to the conventions of your operating system. Using the package's infrastructure to start the server will be much less work than figuring out how to do this yourself. Consult the package-level documentation for details.
The bare-bones way to start the server manually is just to invoke
lightdb directly, specifying the location of the
data directory with the -D option, for example:
$ lightdb -D /usr/local/pgsql/data
which will leave the server running in the foreground. This must be
done while logged into the LightDB user
account. Without -D, the server will try to use
the data directory named by the environment variable LTDATA.
If that variable is not provided either, it will fail.
Normally it is better to start lightdb in the
background. For this, use the usual Unix shell syntax:
$ lightdb -D /usr/local/pgsql/data >logfile 2>&1 &
It is important to store the server's stdout and stderr output somewhere, as shown above. It will help for auditing purposes and to diagnose problems. (See Section 22.3 for a more thorough discussion of log file handling.)
The lightdb program also takes a number of other
command-line options. For more information, see the
lightdb reference page
and Chapter 17 below.
This shell syntax can get tedious quickly. Therefore the wrapper program lt_ctl is provided to simplify some tasks. For example:
lt_ctl start -l logfile
will start the server in the background and put the output into the
named log file. The -D option has the same meaning
here as for lightdb. lt_ctl
is also capable of stopping the server.
Normally, you will want to start the database server when the
computer boots.
Autostart scripts are operating-system-specific.
There are a few example scripts distributed with
LightDB in the
contrib/start-scripts directory. Installing one will require
root privileges.
Different systems have different conventions for starting up daemons
at boot time. Many systems have a file
/etc/rc.local or
/etc/rc.d/rc.local. Others use init.d or
rc.d directories. Whatever you do, the server must be
run by the LightDB user account
and not by root or any other user. Therefore you
probably should form your commands using
su postgres -c '...'. For example:
su lightdb -c 'lt_ctl start -D /usr/local/pgsql/data -l serverlog'
Here are a few more operating-system-specific suggestions. (In each case be sure to use the proper installation directory and user name where we show generic values.)
For FreeBSD, look at the file
contrib/start-scripts/freebsd in the
LightDB source distribution.
On OpenBSD, add the following lines
to the file /etc/rc.local:
if [ -x /usr/local/pgsql/bin/lt_ctl -a -x /usr/local/pgsql/bin/lightdb ]; then
su -l lightdb -c '/usr/local/pgsql/bin/lt_ctl start -s -l /var/lightdb/log -D /usr/local/pgsql/data'
echo -n ' lightdb'
fi
/usr/local/pgsql/bin/lt_ctl start -l logfile -D /usr/local/pgsql/data
to /etc/rc.d/rc.local
or /etc/rc.local or look at the file
contrib/start-scripts/linux in the
LightDB source distribution.
When using systemd, you can use the following
service unit file (e.g.,
at /etc/systemd/system/postgresql.service):
[Unit] Description=LightDB database server Documentation=man:postgres(1) [Service] Type=notify User=lightdb ExecStart=/usr/local/pgsql/bin/lightdb -D /usr/local/pgsql/data ExecReload=/bin/kill -HUP $MAINPID KillMode=mixed KillSignal=SIGINT TimeoutSec=0 [Install] WantedBy=multi-user.target
Using Type=notify requires that the server binary was
built with configure --with-systemd.
Consider carefully the timeout setting. systemd has a default timeout of 90 seconds as of this writing and will kill a process that does not notify readiness within that time. But a LightDB server that might have to perform crash recovery at startup could take much longer to become ready. The suggested value of 0 disables the timeout logic.
On NetBSD, use either the FreeBSD or Linux start scripts, depending on preference.
On Solaris, create a file called
/etc/init.d/lightdb that contains
the following line:
su - lightdb -c "/usr/local/pgsql/bin/lt_ctl start -l logfile -D /usr/local/pgsql/data"
Then, create a symbolic link to it in /etc/rc3.d as
S99lightdb.
While the server is running, its
PID is stored in the file
lightdb.pid in the data directory. This is
used to prevent multiple server instances from
running in the same data directory and can also be used for
shutting down the server.
There are several common reasons the server might fail to start. Check the server's log file, or start it by hand (without redirecting standard output or standard error) and see what error messages appear. Below we explain some of the most common error messages in more detail.
LOG: could not bind IPv4 address "127.0.0.1": Address already in use HINT: Is another postmaster already running on port 5432? If not, wait a few seconds and retry. FATAL: could not create any TCP/IP sockets
This usually means just what it suggests: you tried to start
another server on the same port where one is already running.
However, if the kernel error message is not Address
already in use or some variant of that, there might
be a different problem. For example, trying to start a server
on a reserved port number might draw something like:
$ lightdb -p 666
LOG: could not bind IPv4 address "127.0.0.1": Permission denied
HINT: Is another postmaster already running on port 666? If not, wait a few seconds and retry.
FATAL: could not create any TCP/IP sockets
A message like:
FATAL: could not create shared memory segment: Invalid argument DETAIL: Failed system call was shmget(key=5440001, size=4011376640, 03600).
probably means your kernel's limit on the size of shared memory is
smaller than the work area LightDB
is trying to create (4011376640 bytes in this example).
This is only likely to happen if you have set shared_memory_type
to sysv. In that case, you
can try starting the server with a smaller-than-normal number of
buffers (shared_buffers), or
reconfigure your kernel to increase the allowed shared memory
size. You might also see this message when trying to start multiple
servers on the same machine, if their total space requested
exceeds the kernel limit.
An error like:
FATAL: could not create semaphores: No space left on device DETAIL: Failed system call was semget(5440126, 17, 03600).
does not mean you've run out of disk space. It means your kernel's limit on the number of System V semaphores is smaller than the number LightDB wants to create. As above, you might be able to work around the problem by starting the server with a reduced number of allowed connections (max_connections), but you'll eventually want to increase the kernel limit.
Details about configuring System V IPC facilities are given in Section 16.4.1.
Although the error conditions possible on the client side are quite varied and application-dependent, a few of them might be directly related to how the server was started. Conditions other than those shown below should be documented with the respective client application.
ltsql: could not connect to server: Connection refused
Is the server running on host "server.joe.com" and accepting
TCP/IP connections on port 5432?
This is the generic “I couldn't find a server to talk to” failure. It looks like the above when TCP/IP communication is attempted. A common mistake is to forget to configure the server to allow TCP/IP connections.
Alternatively, you'll get this when attempting Unix-domain socket communication to a local server:
ltsql: could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
The last line is useful in verifying that the client is trying to
connect to the right place. If there is in fact no server
running there, the kernel error message will typically be either
Connection refused or
No such file or directory, as
illustrated. (It is important to realize that
Connection refused in this context
does not mean that the server got your
connection request and rejected it. That case will produce a
different message, as shown in Section 18.15.) Other error messages
such as Connection timed out might
indicate more fundamental problems, like lack of network
connectivity.