EXPLAIN — show the execution plan of a statement
EXPLAIN [ (option[, ...] ) ]statementEXPLAIN [ ANALYZE ] [ VERBOSE ]statementwhereoptioncan be one of: ANALYZE [boolean] VERBOSE [boolean] COSTS [boolean] SETTINGS [boolean] BUFFERS [boolean] WAL [boolean] TIMING [boolean] SUMMARY [boolean] FORMAT { TEXT | JSON }
This command displays the execution plan that the LightDB planner generates for the supplied statement. The execution plan shows how the table(s) referenced by the statement will be scanned — by plain sequential scan, index scan, etc. — and if multiple tables are referenced, what join algorithms will be used to bring together the required rows from each input table.
The most critical part of the display is the estimated statement execution
cost, which is the planner's guess at how long it will take to run the
statement (measured in cost units that are arbitrary, but conventionally
mean disk page fetches). Actually two numbers
are shown: the start-up cost before the first row can be returned, and
the total cost to return all the rows. For most queries the total cost
is what matters, but in contexts such as a subquery in EXISTS, the planner
will choose the smallest start-up cost instead of the smallest total cost
(since the executor will stop after getting one row, anyway).
Also, if you limit the number of rows to return with a LIMIT clause,
the planner makes an appropriate interpolation between the endpoint
costs to estimate which plan is really the cheapest.
The ANALYZE option causes the statement to be actually
executed, not only planned. Then actual run time statistics are added to
the display, including the total elapsed time expended within each plan
node (in milliseconds) and the total number of rows it actually returned.
This is useful for seeing whether the planner's estimates
are close to reality.
Keep in mind that the statement is actually executed when
the ANALYZE option is used. Although
EXPLAIN will discard any output that a
SELECT would return, other side effects of the
statement will happen as usual. If you wish to use
EXPLAIN ANALYZE on an
INSERT, UPDATE,
DELETE, CREATE TABLE AS,
or EXECUTE statement
without letting the command affect your data, use this approach:
BEGIN; EXPLAIN ANALYZE ...; ROLLBACK;
Only the ANALYZE and VERBOSE options
can be specified, and only in that order, without surrounding the option
list in parentheses. Prior to LightDB 9.0,
the unparenthesized syntax was the only one supported. It is expected that
all new options will be supported only in the parenthesized syntax.
ANALYZE
Carry out the command and show actual run times and other statistics.
This parameter defaults to FALSE.
VERBOSE
Display additional information regarding the plan. Specifically, include
the output column list for each node in the plan tree, schema-qualify
table and function names, always label variables in expressions with
their range table alias, and always print the name of each trigger for
which statistics are displayed. This parameter defaults to
FALSE.
COSTS
Include information on the estimated startup and total cost of each
plan node, as well as the estimated number of rows and the estimated
width of each row.
This parameter defaults to TRUE.
SETTINGS
Include information on configuration parameters. Specifically, include
options affecting query planning with value different from the built-in
default value. This parameter defaults to FALSE.
BUFFERS
Include information on buffer usage. Specifically, include the number of
shared blocks hit, read, dirtied, and written, the number of local blocks
hit, read, dirtied, and written, the number of temp blocks read and
written, and the time spent reading and writing data file blocks
(in milliseconds) if track_io_timing is enabled.
A hit means that a read was avoided because the block was
found already in cache when needed.
Shared blocks contain data from regular tables and indexes;
local blocks contain data from temporary tables and indexes;
while temp blocks contain short-term working data used in sorts, hashes,
Materialize plan nodes, and similar cases.
The number of blocks dirtied indicates the number of
previously unmodified blocks that were changed by this query; while the
number of blocks written indicates the number of
previously-dirtied blocks evicted from cache by this backend during
query processing.
The number of blocks shown for an
upper-level node includes those used by all its child nodes. In text
format, only non-zero values are printed. It defaults to
FALSE.
WAL
Include information on WAL record generation. Specifically, include the
number of records, number of full page images (fpi) and the amount of WAL
generated in bytes. In text format, only non-zero values are printed.
This parameter may only be used when ANALYZE is also
enabled. It defaults to FALSE.
TIMING
Include actual startup time and time spent in each node in the output.
The overhead of repeatedly reading the system clock can slow down the
query significantly on some systems, so it may be useful to set this
parameter to FALSE when only actual row counts, and
not exact times, are needed. Run time of the entire statement is
always measured, even when node-level timing is turned off with this
option.
This parameter may only be used when ANALYZE is also
enabled. It defaults to TRUE.
SUMMARY
Include summary information (e.g., totaled timing information) after the
query plan. Summary information is included by default when
ANALYZE is used but otherwise is not included by
default, but can be enabled using this option. Planning time in
EXPLAIN EXECUTE includes the time required to fetch
the plan from the cache and the time required for re-planning, if
necessary.
FORMAT
Specify the output format, which can be TEXT, JSON.
Non-text output contains the same information as the text output
format, but is easier for programs to parse. This parameter defaults to
TEXT.
boolean
Specifies whether the selected option should be turned on or off.
You can write TRUE, ON, or
1 to enable the option, and FALSE,
OFF, or 0 to disable it. The
boolean value can also
be omitted, in which case TRUE is assumed.
statement
Any SELECT, INSERT, UPDATE,
DELETE, VALUES, EXECUTE,
DECLARE, CREATE TABLE AS, or
CREATE MATERIALIZED VIEW AS statement, whose execution
plan you wish to see.
The command's result is a textual description of the plan selected
for the statement,
optionally annotated with execution statistics.
Section 14.1 describes the information provided.
In order to allow the LightDB query
planner to make reasonably informed decisions when optimizing
queries, the pg_statistic
data should be up-to-date for all tables used in the query. Normally
the autovacuum daemon will take care
of that automatically. But if a table has recently had substantial
changes in its contents, you might need to do a manual
ANALYZE rather than wait for autovacuum to catch up
with the changes.
In order to measure the run-time cost of each node in the execution
plan, the current implementation of EXPLAIN
ANALYZE adds profiling overhead to query execution.
As a result, running EXPLAIN ANALYZE
on a query can sometimes take significantly longer than executing
the query normally. The amount of overhead depends on the nature of
the query, as well as the platform being used. The worst case occurs
for plan nodes that in themselves require very little time per
execution, and on machines that have relatively slow operating
system calls for obtaining the time of day.
To show the plan for a simple query on a table with a single
integer column and 10000 rows:
EXPLAIN SELECT * FROM foo;
QUERY PLAN
---------------------------------------------------------
Seq Scan on foo (cost=0.00..155.00 rows=10000 width=4)
(1 row)
Here is the same query, with JSON output formatting:
EXPLAIN (FORMAT JSON) SELECT * FROM foo;
QUERY PLAN
--------------------------------
[ +
{ +
"Plan": { +
"Node Type": "Seq Scan",+
"Relation Name": "foo", +
"Alias": "foo", +
"Startup Cost": 0.00, +
"Total Cost": 155.00, +
"Plan Rows": 10000, +
"Plan Width": 4 +
} +
} +
]
(1 row)
If there is an index and we use a query with an indexable
WHERE condition, EXPLAIN
might show a different plan:
EXPLAIN SELECT * FROM foo WHERE i = 4;
QUERY PLAN
--------------------------------------------------------------
Index Scan using fi on foo (cost=0.00..5.98 rows=1 width=4)
Index Cond: (i = 4)
(2 rows)
Here is the same plan with cost estimates suppressed:
EXPLAIN (COSTS FALSE) SELECT * FROM foo WHERE i = 4;
QUERY PLAN
----------------------------
Index Scan using fi on foo
Index Cond: (i = 4)
(2 rows)
Here is an example of a query plan for a query using an aggregate function:
EXPLAIN SELECT sum(i) FROM foo WHERE i < 10;
QUERY PLAN
---------------------------------------------------------------------
Aggregate (cost=23.93..23.93 rows=1 width=4)
-> Index Scan using fi on foo (cost=0.00..23.92 rows=6 width=4)
Index Cond: (i < 10)
(3 rows)
Here is an example of using EXPLAIN EXECUTE to
display the execution plan for a prepared query:
PREPARE query(int, int) AS SELECT sum(bar) FROM test
WHERE id > $1 AND id < $2
GROUP BY foo;
EXPLAIN ANALYZE EXECUTE query(100, 200);
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------
HashAggregate (cost=9.54..9.54 rows=1 width=8) (actual time=0.156..0.161 rows=11 loops=1)
Group Key: foo
-> Index Scan using test_pkey on test (cost=0.29..9.29 rows=50 width=8) (actual time=0.039..0.091 rows=99 loops=1)
Index Cond: ((id > $1) AND (id < $2))
Planning time: 0.197 ms
Execution time: 0.225 ms
(6 rows)
Of course, the specific numbers shown here depend on the actual
contents of the tables involved. Also note that the numbers, and
even the selected query strategy, might vary between
LightDB releases due to planner
improvements. In addition, the ANALYZE command
uses random sampling to estimate data statistics; therefore, it is
possible for cost estimates to change after a fresh run of
ANALYZE, even if the actual distribution of data
in the table has not changed.
There is no EXPLAIN statement defined in the SQL standard.